
9
Resetting the Low Battery Light
1. Remove the old battery.
2. Before inserting a new battery,
let the receiver collar sit for five
minutes with no battery.
(If you forget to wait prior to inserting a
new battery, the “low battery” light will continue to blink red until it
automatically resets itself after 24 hours.)
3. After five minutes, insert the new battery.
Battery Plans
Ask your DogWatch Dealer about a battery plan. If your DogWatch Dealer
does not offer a battery plan, you can join the DogWatch Battery Program,
where a new battery is mailed to you every 6 or 24 months, depending
on the type of receiver you own. Call DogWatch at 800-793-3436 or join
through the website at
www.dogwatch.com
.
IMPORTANT:
The use of any battery other than a battery authorized by
DogWatch Inc. can cause erratic operation of the Receiver collar or could cause
permanent damage. The use of any unauthorized battery will void the warranty
on the receiver collar.
Battery Insertion Instructions
R7 Battery:
The R7 receiver is powered by a 3 volt (1/3 N) lithium battery. The
receiver is designed for a battery life of up to 6 months. The
negative
(-) end of
the battery must be inserted
down.
R9 Battery:
The R9 battery is powered by a 3.6 volt lithium battery. The receiver
is designed for a battery life of up to two years. The
positive
(+) end of the battery
must be inserted
down
.
Insert R7m battery NEGATIVE end down.
Insert R9 battery POSITIVE end down.
Batteries
Содержание ProFence
Страница 1: ...Owner s Guide ProFence ...