48
ENGLISH
8.7 CAR mode
Car bodywork and electronics may affect the digital compass function in the receiver
– tracked dog direction may not be displayed correctly. When the CAR mode is
enabled, the tracked dog direction will not be determined from the digital compass,
but from the change in the GPS receiver’s position.
Turning the car mode on/off:
1.
Press and hold the
MENU
button and select with / the
setting.
2.
To enable the mode select
, to disable the mode select
.
3.
For the correct operation, it is necessary to keep the RF receiver in the direction of
travel and at the same time keep moving (speed higher than 1 m/s). If the receiver
is not moving, the arrow will start blinking and keep pointing the last stored
direction.
Setting the radius
–
Setting the virtual circle radius only relates to hunting wild boars. If the dog stays
within this circle for a certain time, the receiver asses that the dog is in the wild pig
vicinity. The circle radius may be set between 5 and 60 m.
Setting the time
–
Setting the time only relates to the hunting wild boars mode. The indication is
activated if the dog stays within the virtual circle for a certain time. The time may be
set between 30 and 120 seconds.
Updating
frequency [s]
3
6
9
Time
1
2
3
4
1
2
3
4
1
2
3
4
Indication delay [s] 7
10 13 16 10 16 22 28 11 20 29
38
The times given in the table are indicative.
NOTE:
The activated sound and vibration function can be deactivate while using
the BEEPER function by pressing the key . The indication will be deactivated
only for the currently selected transmitter, that is currently being displayed in the
main navigation menu. After dog's status is changed - movement / standing by,
the indicator is activated again.
Setting the delay
–
Setting the delay for Mode 0, 1, 2, 5 and 6 – the indication is activated when the
dog stays in the given state (motion/standstill) for the set time. The status indication
delay is also dependent on the set updating frequency (Paragraph
6.4
, Page 37).
