46
ENGLISH
8.6 BEEPER feature
The BEEPER feature is mainly used by gamekeepers/hunters to distinguish the
intensity of movement or the presence of a dog near wild pig.
If the transmitter (collar) is turned on and the dog is in motion, the
BEEPER message
flashes
in the main navigation window on the receiver display. If the dog does not
move or is near wild pig, the
BEEPER is lit continuously
. In the top line of the display,
the BEEPER indicates status when the sound or vibration indication is selected for at
least one dog on the receiver.
WARNING:
By saving the waypoint to a position where you have a paired
transmitter or other receiver, will delete the transmitter (receiver) from the
receiver's memory.
8.5 WAYPOINT – saving receiver’s location
The waypoint feature enables saving the GPS coordinates of the current receiver
(handset) location. Subsequently, you may navigate to the saved location.
Saving waypoint:
1
. Hold the
CODE
push button on the receiver for 2 seconds.
2.
Select position to which you wish to save the waypoint by / arrows. If the
position is empty (at given position there is no paired transmitter, other receiver
or saved waypoint), the
message is shown on the display.
3.
Hold the
MENU
push button for 2 seconds to show
.
4.
Press the push button to return to the main screen.
To navigate to the saved waypoint, select in the main navigation panel by /
arrows the saved location.
Deleting waypoint:
1.
Switch off all transmitters
(collars) in the receiver vicinity.
2.
Hold the
CODE
push button on the receiver for 2 seconds.
3.
Select position you wish to delete by / arrows.
4.
Hold the
CODE
push button for 2 seconds – after approximately 20 seconds the
message is displayed.
5.
Press the push button to return to the main screen.
Turning off FENCE:
1.
Select the dog number for which you wish to disable FENCE on the main
navigation panel.
2.
Press and hold the
FENCE
push button.
3.
Set
OFF
by / arrows.
4.
Press briefly to return to the main screen.
NOTE:
To use the FENCE and tracking features simultaneously, pair one dog into
two positions in the receiver. Then, in one of the positions the FENCE feature may
be activated and use the second one for tracking.
