11
TRANSMITTER
Transmitter Battery Charging Receptacle
Located on the side of the transmitter, the
receptacle is covered by a rubber plug. Insert
one end of the battery charging cable into the
receptacle to charge the battery.
(See Battery Charging Procedure.)
After charging is completed, close the
receptacle with its rubber plug to prevent dirt
from getting inside.
Transmitter
Charging
Receptacle
10
TRANSMITTER
Intensity Selection Dial
The intensity selection dial is located on the top of
the transmitter.
In the fully counter clockwise position- zero
setting- no electrical stimulation occurs even when the
transmitter button is pressed (a satety feature).
Moving the dial from the zero setting in a
clockwise manner, electrical stimulation will begin .
Moving the dial clockwise, the level increases in a
linear progression - no steps or increments up to the
level one hundred (fully clockwise).
Conversely, moving the dial counter-clockwise, the
level reduces in a downward linear progression until at
the zero setting (fully counter-clockwise).
This feature allows for subtle adjustment of the level
(upward of downward) while the transmitter button is
held down continuously - providing e-linear training.
