Level 1 is the lowest. “
T
” is the highest and
normally used for testing the collar.
Charging the collar
The LED indicator will flash Green every 2 seconds when the collar is
on. If the collar is not activated within 10 seconds, it will turn into
sleep mode and the LED will be off.
The DMT Advance bark collar has a built in safety feature which will
automatically shut off for 1 minute if it is activated 5 times or more.
The LED light will flash Red and Green during this period of time.
Then the light will be off to indicate it is back to sleep mode.
Testing
1.
Turn the “Intensity” level to 1 and the “Sensitivity Dial” to level 5
2.
Test by scratching the rough surface of the test tool on the collar
(as shown in the diagram) using a coin or a pen. The LED light should
flash Green to indicate the collar is working.
