English
User manual Doggyride eXtraLuxe
1. Assembly manual Doggyride Extraluxe
x
The trailer is already partially assembled inside the carton.
x
Take the DoggyRide out of the carton and unfold it. By opening the back side and top part you can put
the cross bar in the right position to keep the sides up. Connect the cross bar with a safety pin.
x
Place the wheels by pressing the quick release button on the centre of the wheel and placing the wheels
into the axle holder. Ensure the riding direction on the tires to make sure the two wheels are put on the
right side (it is necessary to put the right wheel on the right side). The riding direction is a V pointing as a
> sign.
x
Place the tow bar in the tube positioned at the side and front of the frame and secure it with the
enclosed quick locking screw or the M6 bolt and nut. Using the bolt and nut makes the connection more
permanent.
x
Now you can connect the trailer to the bicycle. Please make sure you connect the safety strap around
the frame part of the bicycle!
2. Connecting the Doggyride Extraluxe
Picture 1
Read the LockIt-Go® manual for
connection of the lock hitch to the bicycle.
Picture 2
Open the LockIt-Go hitch by turning the key counter
clockwise. Place the tow bar in the Hitch and close the
hitch by turning the key clockwise. Remove the key and
close the cap to prevent water or dirt fouling the lock.
Picture 3
As soon as the trailer is connected to the bicycle, wrap
the safety strap around the bicycle frame. So in case the
trailer lets loose from the hitch it will still be connected to
the bicycle.
Important: The connection to the bicycle is the most
important part of the assembly and use of the bicycle
trailer. Please do this carefully.
