doepfer
System A - 100
MCV 16
A-191
7
4.3 In- / Outputs
!
CV outputs
Sockets
!
are the MIDI-CV interface’s CV outputs:
LFO
•
LFO
•
LFO
These sockets are the outputs for the
sawtooth,
triangle
and
rectangle
waves produced by the
inter-
nal LFO.
LEDs
1
and
2
give an indication of the
voltages at the sawtooth and triangle wave outputs.
H
Don’t forget that the LFO will only work if a
MIDI clock
is being received on the selected
MIDI channel (see chapter 4.1, Basics).
AT • ... • C16
These 13 sockets output the control voltages conver-
ted from their respective
MIDI controllers
(see table
1). Their voltage range is from 0 V to +5 V.
"
MIDI In
This MIDI input socket should be connected to the
MIDI keyboard or sequencer, etc., that you want to
control the System A-100, with a standard MIDI lead.
As well as converting MIDI controllers After Touch,
Pitch Wheel, #01, #02, #04 to #08, #10, #11, #12 and
#16, and turning them into voltages available at the
corresponding CV outputs (see table 1), the A-191
also responds to MIDI clock - and to MIDI controller
#92 ("Tremolo Depth") for controlling the internal
LFOs.
