Dodge Viper2017, Руководство пользователя

Страница: 129 / 204

Instrument Cluster Display Selectable Menu Items
The instrument cluster display can be used to select and configure which vehicle
information is displayed. To step to each main menu feature push the
up or down arrow
button once for each step. A step from the last item in the list will cause the first item in
the feature list to be displayed. The following features are in the main menu:
• Tach • Audio
• MPH/kmh • Stored Messages
• Vehicle Info • Screen Set Up
• Fuel Economy • Performance
• Trip A • Hibernate
• Trip B
NOTE:
For features in the instrument cluster display that can be reset (Average Fuel Economy),
the instrument cluster display prompts a reset with a
right arrow button graphic and the
word RESET next to it.
Key Fob Programmable Features
The following features may also be programmed by using the key fob or the ignition and
driver's door lock switch. Refer to “Uconnect Settings” in “Understanding Your Instru-
ment Panel” in the Owner’s Manual on www.dodge.com/en/owners/manuals for further
information.
NOTE:
Pushing the lock button while you are inside the vehicle will activate the vehicle security
alarm. Opening a door with the vehicle security alarm activated will cause the alarm to
sound. Push the unlock button to deactivate the vehicle security alarm.
Unlock On First Press
To unlock either the driver's side, or all doors, on the first press of the unlock button:
1. Push and hold the lock button for at least four seconds, but no longer than 10 seconds.
Then, push and hold the unlock button while still holding the lock button.
2. Release both buttons at the same time.
Auto Unlock Doors On Exit
To have all of the vehicle doors unlock when any door is opened:
1. Enter your vehicle and close all the doors, and fasten your seat belt.
2. Cycle the ignition switch between the OFF and ON position four times, ending in the
OFF position (do not start the engine).
3. Push the power door unlock switch to unlock the doors. A single chime will indicate
that programming is complete.
E L E C T R O N I C S
127