Dodge Viper 2017, Руководство по эксплуатации

Страница: 14 / 389

CAUTION!
•
Do not make modifications or alterations to
the immobilizer system. Modifications or
alterations to the immobilization system
may result in a loss of security protection.
•
The Sentry Key Immobilizer system is not
compatible with some aftermarket remote
starting systems. Use of these systems
may result in vehicle starting problems and
loss of security protection.
All of the key fobs provided with your new
vehicle have been programmed to the vehicle
electronics.
Replacement Key Fobs
NOTE:
Only key fobs that are programmed to the
vehicle electronics can be used to start and
operate the vehicle. Once a key fob is pro-
grammed to a vehicle, it cannot be pro-
grammed to any other vehicle.
CAUTION!
•
Always remove the key fobs from the ve-
hicle and lock all doors when leaving the
vehicle unattended.
•
For vehicles equipped with Keyless Enter-
N-Go — Ignition, always remember to
place the ignition in the OFF position.
NOTE:
Duplication of key fobs may be performed at
an authorized dealer. This procedure con-
sists of programming a blank key fob to the
vehicle electronics. A blank key fob is one
that has never been programmed.
When having the Sentry Key Immobilizer Sys-
tem serviced, bring all vehicle keys with you to
an authorized dealer.
VEHICLE SECURITY ALARM
SYSTEM
The vehicle security alarm monitors the doors,
liftgate, and hood for unauthorized entry and the
ignition for unauthorized operation. If something
triggers the alarm, the vehicle security alarm will
prevent the vehicle from starting. It will also
sound the horn and flash the park lights, and
taillights.
Rearming Of The System
If something triggers the alarm, and no action is
taken to disarm it, the vehicle security alarm will
turn off the horn after three minutes, turn off all
of the visual signals (flashing lights) after
15 minutes, and then rearm itself.
To Arm The System
Follow these steps to arm the vehicle security
alarm:
1. Make sure the vehicle ignition system is in
the " OFF " position.
2. Perform one of the following methods to lock
the vehicle:
•
Push the lock button on the interior power
door lock switch with the driver and/or
passenger door open.
•
Push the lock button on the key fob.
3. If any doors are open, close them.
To Disarm The System
The vehicle security alarm can be disarmed
using any of the following methods:
•
Push the unlock button on the Remote Key-
less Entry key fob.
•
Cycle the vehicle ignition system out of the
OFF position:
•
Push the Keyless Enter-N-Go Start/Stop
button (requires at least one valid key fob
in the vehicle).
NOTE:
•
The liftgate key cylinder cannot arm or
disarm the vehicle security alarm.
•
When the vehicle security alarm is armed,
the interior power door lock switches will
not unlock the doors.
The vehicle security alarm is designed to protect
your vehicle. However, you can create condi-
tions where the system will give you a false
alarm. If one of the previously described arming
sequences has occurred, the vehicle security
alarm will arm regardless of whether you are in
11