Dodge Viper 2014 SRT, Руководство пользователя

Страница: 47 / 132

To use this feature after the Uconnect ® Access App is downloaded, login using your user
name and Uconnect
®
Security PIN. You can set-up notifications for your account to
receive an email or text (SMS) message every time a command is sent. Login to Mopar
Owner Connect (moparownerconnect.com) and click on Edit Profile to manage
Uconnect
® Notifications.
Voice Texting (U.S. Residents Only) — Want to dictate a personal message? Register with
Uconnect ® Access to take advantage of a new, cloudbased Voice Texting service, an
enhancement to Voice Text Reply.
Voice Texting allows you to compose a new text or reply to an incoming text message.
Before you attempt to use the Voice Texting feature, check to ensure you have the
following:
1. A paired, Bluetooth
®
enabled phone with the Message Access Profile (MAP). Not all
Bluetooth
®
enabled phones support MAP, including all iPhones
®
(Apple iOS). Visit
UconnectPhone.com for system and device compatibility information.
2. An active Uconnect ® Access trial or paid subscription. Press the “U” button on the
lower right hand corner of the touchscreen to begin the registration process.
3. Accept the Allow MAP profile request on your smart phone. (Please refer to device
manufacturer instructions for details).
To Send A Text Message:
1. Press the “Uconnect
®
Phone” button.
2. Wait for the beep.
3. Say “Text.”
4. Uconnect ® will prompt you “Say the phone number, or full name and phone type of the
contact you want to send a message to.”
5. Wait for the beep and say a contact that is in your phonebook, or a mobile phone
number that you would like to send the message to.
6. Uconnect
®
will prompt you “Please say the message that you would like to send.” (If
you do not hear this prompt, you may not have an active subscription with Uconnect
®
Access).
7. Wait for the beep, and then dictate any message up to 140 characters. If you exceed
140 characters, you will hear the following prompt: “Message was too long; your
message will be truncated.”
8. Uconnect ® will then repeat the message back to you.
9. Uconnect ® will prompt you: “To add to your message, say “Continue”; To delete the
current message and start over, say “Start Over”; to send the current message, say
“Send”; to hear the message again, say “Repeat”.
10. If you are happy with your message and would like to send it, wait for the beep and
say “Send”.
11. Uconnect ® will then say “Sending your message.”
E L E C T R O N I C S
45