Dodge Ram Commercial2016 Скачать руководство пользователя страница 408 | Manualshive

Страница: 408 / 675

Dodge Ram Commercial2016 Скачать руководство пользователя страница 408

CAUTION!

(Continued)

•

Do not shift between PARK, REVERSE, NEU-
TRAL, or DRIVE when the engine is above idle
speed.

•

Before shifting into any gear, make sure your foot
is firmly pressing the brake pedal.

NOTE:

You must press and hold the brake pedal while

shifting out of PARK.

WARNING!

•

It is dangerous to shift out of PARK or NEUTRAL
if the engine speed is higher than idle speed. If
your foot is not firmly pressing the brake pedal, the
vehicle could accelerate quickly forward or in re-
verse. You could lose control of the vehicle and hit
someone or something. Only shift into gear when

(Continued)

WARNING!

(Continued)

the engine is idling normally and your foot is
firmly pressing the brake pedal.

•

Unintended movement of a vehicle could injure
those in or near the vehicle. As with all vehicles,
you should never exit a vehicle while the engine is
running. Before exiting a vehicle, always shift an
automatic transmission into PARK, or a manual
transmission into FIRST gear or REVERSE, turn
the engine OFF, apply the parking brake, and
remove the ignition key. When the ignition is in the
LOCK/OFF (key removal) position, an automatic
transmission is locked in PARK, securing the ve-
hicle against unwanted movement.

•

When leaving the vehicle, always remove the key
fob from the ignition and lock your vehicle. If
equipped with Keyless Enter-N-Go, always make

(Continued)

406

STARTING AND OPERATING

«
...
406
407
408
409
410
...
»

Содержание Ram Commercial2016




































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов