Dodge Ram Commercial2016 Скачать руководство пользователя страница 180 | Manualshive

Страница: 180 / 675

Dodge Ram Commercial2016 Скачать руководство пользователя страница 180

The Rain Sensing system has protection features for the
wiper blades and arms, and will not operate under the
following conditions:

•

Low Ambient Temperature

— When the ignition is

first turned ON, the Rain Sensing system will not
operate until the wiper switch is moved, vehicle speed
is greater than 0 mph (0 km/h), or the outside tem-
perature is greater than 32°F (0°C).

•

Transmission In NEUTRAL Position

— When the

ignition is ON, and the transmission is in the NEU-
TRAL position, the Rain Sensing system will not
operate until the wiper switch is moved, vehicle speed
is greater than 5 mph (8 km/h), or the gear selector is
moved out of the NEUTRAL position.

•

Remote Start Mode Inhibit

— On vehicles equipped

with Remote Starting system, Rain Sensing wipers are
not operational when the vehicle is in the remote start
mode. Once the operator is in the vehicle and has

placed the ignition switch in the RUN position, rain
sensing wiper operation can resume, if it has been
selected, and no other inhibit conditions (mentioned
previously) exist.

TILT STEERING COLUMN

This feature allows you to tilt the steering column
upward or downward. The tilt lever is located on the
steering column, below the multifunction lever.

Pull the lever toward the steering wheel to unlock the
steering column. With one hand firmly on the steering
wheel, move the steering column up or down, as desired.
Release the lever to lock the steering column firmly in
place.

178

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
178
179
180
181
182
...
»

Содержание Ram Commercial2016




































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов