Dodge DURANGO 2020, Руководство пользователя

Страница: 32 / 452

30 GETTING TO KNOW YOUR VEHICLE

Be sure to program the radio presets prior to
programming the memory settings.
The memory setting switch is located on the
driver’s door trim panel. The switch consists of
three buttons:

The set (S) button, which is used to activate
the memory save function.

The (1) and (2) buttons which are used to
recall either of two saved memory profiles.
Memory Setting Buttons
P
ROGRAMMING
T
HE
M
EMORY
F
EATURE
To create a new memory profile, perform the
following:
1. Place the vehicle’s ignition in the ON/RUN
position (do not start the engine).
2. Adjust all memory profile settings to desired
preferences (i.e., seat, side mirror, power tilt
and telescopic steering column [if
equipped], and radio station presets).
3. Push the set (S) button on the memory
switch, and then push the desired memory
button (1 or 2) within five seconds. The
instrument cluster display will display which
memory position has been set.
NOTE:
Memory profiles can be set without the vehicle
in PARK, but the vehicle must be in PARK to
recall a memory profile.
L
INKING
A
ND
U
NLINKING
T
HE
R
EMOTE
K
EYLESS
E
NTRY
K
EY
F
OB
T
O
M
EMORY
Your key fobs can be programmed to recall one
of two saved memory profiles by pushing the
unlock button on the key fob.
NOTE:
Before programming your key fobs you must
select the “Memory Linked To Fob” feature
through the Uconnect system settings. Refer to
“Uconnect Settings” in “Multimedia” for further
information.
To program your key fobs, perform the following:
1. Place the vehicle’s ignition in the OFF
position.
2. Select a desired memory profile, 1 or 2.
3. Once the profile has been recalled, push
and release the set (S) button on the
memory switch. Then, within five seconds,
push and release button (1) or (2)
accordingly. “Memory Profile Set” (1 or 2)
will display in the instrument cluster display.
4. Push and release the lock button on the key
fob within 10 seconds.
20_WD_OM_EN_USC_t.book Page 30