Dodge Durango 2015, Руководство по эксплуатации

Страница: 342 / 738

Front Turn Signal
1. Open the hood.
2. Turn the turn signal bulb one–quarter turn
counterclockwise to remove from housing.
3. Disconnect the electrical connector and re-
place the bulb.
CAUTION!
Do not touch the new bulb with your fingers.
Oil contamination will severely shorten bulb
life. If the bulb comes in contact with any oily
surface, clean the bulb with rubbing alcohol.
Front Fog Lamps
1. Reach through the cutout in the splash
shield and rotate the bulb’s electrical con-
nector one-quarter turn counterclockwise
and remove it from the fog lamp housing.
2. Remove the bulb from the connector and
install the replacement bulb.
3. Install the bulb and connector assembly into
the fog lamp housing and rotate the connec-
tor one-quarter turn clockwise to lock it in
place.
CAUTION!
•
Do not touch the new bulb with your fin-
gers.
Oil contamination will severely
shorten bulb life. If the bulb comes in
contact with any oily surface, clean the
bulb with rubbing alcohol.
•
Always use the correct bulb size and type
for replacement. An incorrect bulb size or
type may overheat and cause damage to
the lamp, the socket or the lamp wiring.
Rear Tail, Stop And Turn Signal
Lamps
The rear tail, stop, and turn signal lamps are
LED. See your authorized dealer for replace-
ment.
Rear Liftgate Mounted Back-up
Lamps
1. Raise the liftgate.
2. Use a fiber stick or flat blade screw driver to
pry the lower trim from the liftgate.
3. Back-up lamps are now visible. Rotate sock-
et(s) counter clockwise.
4. Remove/replace bulb(s).
5. Reinstall the socket(s)
6. Reverse process to reinstall the liftgate trim.
Center High-Mounted Stop Lamp
(CHMSL)
The center high-mounted stop lamp is an LED
assembly. See your authorized dealer for re-
placement.
Rear License Lamp
The rear license lamps are LED. See your
authorized dealer for replacement.
339