Dodge 2016 JOURNEY Скачать руководство пользователя страница 410 | Manualshive

Страница: 410 / 664

Dodge 2016 JOURNEY Скачать руководство пользователя страница 410

14. Driver Temperature Control Down Button (Uconnect
8.4)

Provides the driver with independent temperature con-
trol. Push the button for cooler temperature settings.

NOTE:

In Sync mode, this button will also automatically

adjust the passenger temperature setting at the same
time.

15. Driver Temperature Control Up Button (Uconnect
8.4)

Provides the driver with independent temperature con-
trol. Push the button for warmer temperature settings.

NOTE:

In Sync mode, this button will also automatically

adjust the passenger temperature setting at the same time.

16. Temperature Control (Uconnect 4.3)

Press the driver or passenger temperature button on the
touchscreen to regulate the temperature of the air inside

the passenger compartment. Moving the temperature bar
into the red area, indicates warmer temperatures. Mov-
ing the temperature bar into the blue area indicates cooler
temperatures. Driver and passenger have independent
temperature control if Sync mode is not illuminated.

Climate Control Functions

A/C (Air Conditioning)

The Air Conditioning (A/C) button allows the operator
to manually activate or deactivate the air conditioning
system. When the air conditioning system is turned on,
cool dehumidified air will flow through the outlets into
the cabin. For improved fuel economy, press the A/C
button to turn off the air conditioning and manually
adjust the blower and airflow mode settings. Also, make
sure to select only Panel, Bi-Level or Floor modes.

408

UNDERSTANDING YOUR INSTRUMENT PANEL

«
...
408
409
410
411
412
...
»

Содержание 2016 JOURNEY

























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды