Dodge 2016 JOURNEY Скачать руководство пользователя страница 102

Страница: 102 / 664

Frequently Asked Questions About Installing Child Restraints With Seat Belts

What is the weight limit (child’s

weight of the child restraint) for using the

Tether Anchor with the seat belt to attach a

forward facing child restraint?

Weight limit of

the Child

Restraint

Always use the tether anchor when using

the seat belt to install a forward facing child

restraint, up to the recommended weight

limit of the child restraint.

Can the rear-facing child restraint touch the

back of the front passenger seat?

Yes

Contact between the front passenger seat

and the child restraint is allowed, if the child

restraint manufacturer also allows contact.

Can the head restraints be removed?

Yes

5 Passenger Vehicle: All second row head

restraints are removable.

7 Passenger Vehicle: All second and third

row head restraints are removable.

Can the buckle stalk be twisted to tighten

the seat belt against the belt path of the child

restraint?

Yes

In positions with cinching latch plates

(CINCH), the buckle stalk may be twisted
up to 3 full turns. Do not twist the buckle

stalk in a seating position with an

ALR retractor.

100

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание 2016 JOURNEY
























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2016 JOURNEY

Отзывы:

Бренды по названию

Популярные бренды

Dodge 2016 JOURNEY, Руководство пользователя

Результаты поиска

Содержание 2016 JOURNEY

Отзывы:

Бренды по названию

Популярные бренды