Dodge 2016 Challenger, Руководство по эксплуатации

Страница: 154 / 737

•
When a force greater than zero is measured,
the display will update the value as it climbs.
As the G-Force falls, the peak forces will
continue to display.
•
Push and hold the OK button to clear the
peak force values.
Lap Timer
When selected, the Lap Timer page will show
the timer always at 0:00.00 with the previous
Best and Last time data (unless the driver has
cleared it via hold to Reset).
•
Pushing the OK button will start “current”
timer from 0:00.0.
•
When the OK button is pushed, the times are
updated accordingly.
•
As soon as the driver exits the Lap Timer
pages, the “current” timer will stop and the
time will be reset to 0:00.00.
•
If the driver stays on the Lap Timer pages,
the “current” timer will reset to 0:00.0 when
ignition is placed in the off position, or ignition
placed in the ON position (or will roll over at
59:59.99 if ever possible).
•
Each time the driver pushes the OK button
for a Lap that current time populates, the Last
time and also populates the 1st (top) space
on the Timer History page the current time
resets to 0:00.0 at every push of the OK
button.
•
The timer will stop when the driver navigates
away from this page.
Lap History
When selected, this screen displays the Lap
History, and will color highlight the time that is
the best time from the Timer Page.
•
Each time the driver pushes the OK button
(while on the Lap Timer page) the current
Lap Time populates the 1st spot and the rest
of the data shifts down.
•
Color will indicate the time that is the best
time from the Timer Page.
•
Holding the OK button only resets the page
you are on.
•
Lap History page is a static display of lap
times only.
Top Speed
When selected, this screen displays the Top
Speed since last reset:
•
Populates a top speed from first drive cycle
and every time that speed is exceeded that
number is stored here unless/until the driver
resets the screen.
•
Latching over ignition cycles.
•
Units will change with the global change in
units.
Driver Assist — If Equipped
Adaptive Cruise Control (ACC) Menu
The DID displays the current ACC system set-
tings. The information displayed depends on
ACC system status.
Push the ADAPTIVE CRUISE CONTROL
(ACC) ON/OFF button (located on the steering
wheel) until one of the following displays in the
DID:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
“Adaptive Cruise Control Off.”
151