Dodge 2014 Durango Скачать руководство пользователя страница 478 | Manualshive

Страница: 478 / 664

Dodge 2014 Durango Скачать руководство пользователя страница 478

•

Install on Rear Tires Only

•

Due to limited clearance, the THULE XG-12 PRO
traction device or equivalent is recommended on
P265/60R18 or 265/50R20 tires.

WARNING!

Using tires of different size and type (M+S, Snow)
between front and rear axles can cause unpredictable
handling. You could lose control and have a collision.

CAUTION!

To avoid damage to your vehicle or tires, observe the
following precautions:

(Continued)

CAUTION!

(Continued)

•

Because of restricted traction device clearance be-
tween tires and other suspension components, it is
important that only traction devices in good condi-
tion are used. Broken devices can cause serious
damage. Stop the vehicle immediately if noise
occurs that could indicate device breakage. Remove
the damaged parts of the device before further use.

•

Install device as tightly as possible and then re-
tighten after driving about ½ mile (0.8 km).

•

Do not exceed 30 mph (48 km/h).

•

Drive cautiously and avoid severe turns and large
bumps, especially with a loaded vehicle.

•

Do not drive for a prolonged period on dry pave-
ment.

(Continued)

476

STARTING AND OPERATING

«
...
476
477
478
479
480
...
»

Содержание 2014 Durango

























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов