Dodge 2014 Durango Скачать руководство пользователя страница 139 | Manualshive

Страница: 139 / 664

Dodge 2014 Durango Скачать руководство пользователя страница 139

NOTE:

•

The BSM system does NOT alert the driver about
rapidly approaching vehicles that are outside the de-
tection zones.

•

The BSM system detection zone DOES NOT change if
your vehicle is towing a trailer. Therefore, visually
verify the adjacent lane is clear for both your vehicle
and trailer before making a lane change. If the trailer or
other object (i.e., bicycle, sports equipment) extends
beyond the side of your vehicle, this may result in the
BSM warning light remaining illuminated the entire
time the vehicle is in a forward gear.

The area on the rear fascia where the radar sensors are
located must remain free of snow, ice, and dirt/road
contamination so that the BSM system can function
properly. Do not block the area of the rear fascia where
the radar sensors are located with foreign objects (bum-
per stickers, bicycle racks, etc.).

The BSM system notifies the driver of objects in the
detection zones by illuminating the BSM warning light
located in the outside mirrors in addition to sounding an
audible (chime) alert and reducing the radio volume.
Refer to “Modes Of Operation” for further information.

Sensor Location (Driver Side Shown)

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

137

«
...
137
138
139
140
141
...
»

Содержание 2014 Durango

























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов