Dodge 2008 Dakota Скачать руководство пользователя страница 297 | Manualshive

Страница: 297 / 439

Dodge 2008 Dakota Скачать руководство пользователя страница 297

WARNING!

A fire may result if gasoline is pumped into a
portable container that is inside of a vehicle or on a
truck bed. You could be burned. Always place gas
containers on the ground while filling.

Fuel Filler Cap (Gas Cap)

The gas cap is behind the fuel filler door. If the gas cap is
lost or damaged, be sure the replacement cap is for use
with this vehicle.

CAUTION!

Damage to the fuel system or emission control sys-
tem could result from using an improper fuel tank
filler tube cap (gas cap). A poorly fitting cap could let
impurities into the fuel system.

WARNING!

•

Never allow any lit smoking materials near the
vehicles while removing the cap or filling the
tank.

•

Never add fuel to the vehicle when the engine is
running.

296

STARTING AND OPERATING

«
...
295
296
297
298
299
...
»

Содержание 2008 Dakota
























































































































































































































































































































































































































































Отзывы:

Нет отзывов