Dodge 2008 Dakota Скачать руководство пользователя страница 109 | Manualshive

Страница: 109 / 439

Dodge 2008 Dakota Скачать руководство пользователя страница 109

If you ever wish to interrupt the system while it lists
options, press the VR hard-key, listen for the beep, and
say your command.

Pressing the VR hard-key while the system is speaking is
known as “barging in.” The system will be interrupted
and you can add or change commands. This will become
helpful once you start to learn the options.

NOTE:

At any time, you can say the words CANCEL,

HELP, or MAIN MENU.

These commands are universal and can be used from any
menu. All other commands can be used depending upon
the active application.

For example, if you are in the disc menu and you are
listening to FM radio, you can speak commands from the
disc menu or from the FM radio menu.

When using this system, you should speak clearly and at
a normal speaking volume.

The system will best recognize your speech if the win-
dows are closed, and the heater/air-conditioning fan is
set to low.

At any point, if the system does not recognize one of your
commands, you will be prompted to repeat it.

To hear the first available Menu, press the VR hard-key
and say HELP or MAIN MENU.

Commands

The Voice Recognition System understands two types of
commands. Global commands are available at all times.
Local commands are available if the supported radio
mode is active.

Changing the Volume

1. Start a dialogue by pressing the VR hard-key.

2. Say a command (e.g., HELP).

108

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
107
108
109
110
111
...
»

Содержание 2008 Dakota
























































































































































































































































































































































































































































Отзывы:

Нет отзывов