Dodge 2001 Ram 1500, Руководство пользователя

Страница: 2845 / 2889

STANDARD PROCEDURE - PRE DELIVERY
STORAGE
(1) If possible, store vehicles indoors, in clean, dry
places. If vehicles must be stored outdoors:
•
Try to avoid storage locations that are near any
obvious sources of industrial or environmental con-
tamination (e.g., trees, factories, steam or vapor
vents, railroad tracks, etc.)
•
Maintain tight security to help prevent pilferage
and vandalism, and inspect each vehicle regularly to
check for such damage
•
If the vehicle must be parked on an incline, park
it with the front end higher than the rear; this will
prevent “hydrostatic lock” caused by fuel draining
into the engine
•
Rinse the vehicle at least once a week. Snow
should be washed away more often, since it can trap
harmful contaminants. Dry all horizontal surfaces
(2) The IOD fuse should be removed in order to
prevent battery drain and possible damage.
(3) Check the vehicle’s coolant and anti-freeze pro-
tection.
(4) Check the vehicle’s battery at least once a
month for a proper charge (at least 12.4 volts).
Charge the battery if necessary. This will help pre-
vent freezing and deterioration.
(5) Check the vehicle’s tires and inflate them to
their maximum recommended levels. Move the vehi-
cles periodically to avoid “flatspotting” the tires.
(6) Do not engage the parking brake; keep it in the
OFF position.
(7) Keep all windows closed, all doors locked, and
all trim covers intact and in place.
(8) Do not use chalks, crayons or any marker con-
taining abrasives on painted, plated or glass sur-
faces.
(9) Always use seat covers when moving a vehicle.
PROGRAMMABLE
ELECTRONIC FEATURES
DESCRIPTION
The programming of electronic features applies to
specific DaimlerChrysler Corporation vehicles. Not
all vehicles are equipped with these electronic fea-
tures, and not all vehicles equipped with electronic
features have all the available features. Programma-
ble electronic features are subject to change and may
be added or deleted from specific vehicle models.
(1) The programmable electronic features that may
be provided on the vehicle are:
•
Rolling Power Door Locks
•
Horn Chirp (When Doors Locked With Remote
Keyless Entry)
•
Headlamp Flash (When Doors Locked or
Unlocked With Remote Keyless Entry)
•
Low Fuel Chime
•
Remote Keyless Entry Door Unlock Sequence
•
Headlights On Automatically With Wipers
•
Turn Signal Chime
•
12V Power Outlet
•
Remote Unlock
•
Remote Linked To Memory
•
Headlamp Delay
•
Service Interval
•
Easy Exit Seat
(2) Programming any of the above features is to be
performed prior to vehicle delivery to the customer,
depending on customer preference.
NOTE: For all vehicles except Caravan/Town and
Country, the programming must be performed using
the DRB III
T
scan tool. On Caravan/Town and Coun-
try vehicles the features can be programmed using
the DRB III
T
scan tool or by button pushing
sequences. The customer can perform program-
ming, if desired, by following the instructions out-
lined in the owner manual.
OPERATION
NOTE: The programmable features provided on
vehicles need to be explained to the customer at
the time of sale. The customer’s preferences con-
cerning the features should be noted and pro-
grammed accordingly during predelivery.
NOTE: When using the DRB III
T
scan tool to enable/
disable any programmable electronic features, go to
the main menu item #9 on the DRB III
T
scan tool.
This is “Customer Preferences”. You must choose
“Customer Preferences” on the main menu to pro-
gram the desired features.
ROLLING POWER DOOR LOCKS
With this feature enabled, the vehicle’s door lock-
ing mechanisms automatically lock when the vehicle
reaches approximately 24 Km/h (15 mph).
HORN CHIRP
NOTE: This feature can be enabled with or without
the headlamp flash feature.
The horn chirp function is a feature that can be
enabled or disabled on vehicles equipped with
30 - 20 NEW VEHICLE PREPARATION
BR/BE
PRE DELIVERY STORAGE (Continued)