BG80 USE AND MAINTENANCE BOOKLET
Rev.1 of 23/04/2013 of BG80 uk agg2013 Page 10 of 40
The mixer is equipped with a robust vibration-resistant frame; this is designed for installation either on the wall or
on the ceiling, and is capable of supporting the gearbox.
3
3
.
.
1
1
.
.
TECHNICAL SPECIFICATIONS
The information provided refers to a standard delivery.
The manufacturer reserves the right to carry out technical modifications, without being required to
communicate these to the users.
1. All parts of the mixer that come into contact with the fluid, as well as all components incorporated into the
tank, are made from stainless steel;
2. The mixer shaft sits in an oil bath;
3. Widia mechanical seal with sliding ring on the transmission shaft;
4. Transmission lubricant oil level check using an indicator, positioned at the point of connection between
the reducer and the transmission;
5. Reducer unit with 80 revs/min of the propeller, motor with 1450 revs/min at 50 Hz;
6. Three-blade self-cleaning propeller, secured to the shaft of the transmission using a hub;
7. Hydraulic adjustment of the mixer depth using a hand pump and
connection tubing, supplied as standard with the equipment;
8. Assembly frame for installation on ceiling or wall;
5
4
7
8
2
6
3
