FRONT PANEL FUNCTIONS
1. INPUT LEVEL KNOB controls the amount of signal that enters the D12
2. RECORD BUTTON engages the record function of the D12
3. PLAY BUTTON plays the sample in the D12’s currently selected bank
4. STOP BUTTON stops the sample in the D12’s currently selected bank
5. GATE/REVERSE activates the gate or enables sample to be played backwards. In
delay mode it engages reverse delay function.
6. STUTTER places a marker in the sample to return to every time the button is pushed
7. DATA WHEEL enables you to find specific points in the sample for easier editing. In
delay mode it selects delay time.
8. EDIT BUTTON enables you to place start/stop points within the sample
9. DISPLAY shows a numeric time index of the sample. In delay mode it shows
delay time
10. BANK 1 accesses 6 seconds of sampling in bank 1
11. BANK 2 accesses 6 seconds of sampling in bank 2
Selecting both bank 1 and bank 2 accesses 12 seconds of combined sampling
12. BANK 3 accesses 6 seconds of sampling in bank 3
13. BANK 4 accesses 6 seconds of sampling in bank 4
Selecting both bank 3 and bank 4 accesses 12 seconds of combined sampling
14. LOOP BUTTON Enables sample to start playing again when it reaches its end point.
When engaged the sample will play continuously until button is pressed again.
15. DELAY BUTTON Places D12 in delay mode
16. TAP TEMPO BUTTON Tapping this button in time with the music enables you to set
the delay time in time with the music.
17. EFFECT ON/OFF BUTTON Engages the LFO for effects ranging from subtle
chorusing to jetlike flanging.
18. SPEED KNOB Controls speed of LFO
19. DEPTH KNOB Controls depth of LFO
20. FEEDBACK KNOB Controls amount of feedback
21. MIX KNOB Blends between dry signal and effect
REAR PANEL FUNCTIONS
1. MIDI IN JACK Plug your MIDI controller in here (optional)
2. FOOTSWITCH INPUT Connect in the DOD FS3M here (optional)
3. A.C. ADAPTER INPUT Connect in the DOD PS750 in here
4. MONITOR OUTPUT Connect to mixer/pre-amp/amp input.
5. MAIN OUTPUT Connect to mixer/pre-amp/amp input.
6. MAIN INPUT (STEREO) Connect output from sample source here
7. MIC INPUT (HI-Z) Connect microphone here
8
Dimension12
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
1 2 3 4 5 6 7
1
Dimension12
SAMPLE BANKS
When sampling, the capabilities of the D12 are as follows:
4 six second samples, only bank1&2 or 3&4 are playable simultaneously.
2 twelve second samples, only 1 twelve second sample playable at a time.
2 six second samples, and 1 twelve second sample can be stored in mem-
ory. Only the 2 six second samples can be played simultaneously. It may
be easier to think of bank 1&2 and bank 3&4 as seperate sample groups.
Only one “group” can play at a time, whether it is 2 six second samples, or
1 12 second sample.
NOTE you must press both banks together to select a 12 second sample.
If you have selected a twelve second sample, and accidentally press a sin-
gle bank button, the sample will be lost.
WARRANTY
1. The warranty registration card must be mailed within ten days after pur-
chase date to validate the warranty of this DOD product.
2. DOD warrants this product (1 year parts, 1 year labor ), when used sole-
ly within the U.S., to be free from defects in material and workmanship
under normal use and service.
3. DOD Electronics liability under this warranty is limited to repairing or
replacing defective materials that show evidence of defect, provided the
product is returned through the original dealer, or an authorized DOD
sevice center where all parts and labor will be covered up to a period of
one (1) year. The company shall not be responsible for any consequential
damage as a result of the products use in any circuit or assembly.
4. Proof of date of purchase is considered to be the burden of the consumer.
5. DOD reserves the right to make changes in design or make improvements
upon this product without incurring any obligation to install the same on
PRODUCTS PREVIOUSLY MANUFACTURED.
6. The foregoing is in lieu of all other warranties, either expressed or implied,
and DOD neither assumes nor authorizes any person to assume any
obligation or liability in connection with the sale of this product. In no event
shall DOD or its dealers be liable for special or consequential damages or
from any delay in the performance of this warranty due to causes beyond
their control.
