DOD Bass30, Руководство пользователя

Страница: 18 / 38

5. Effect - This button will access the Modulation and Pitch shifting effects. The currently selected effect in this
group is indicated by a flashing LED. Successive presses of the Effect button will select a different type of effect
within this group. The choices include: Chorus, Flanger, Phaser, Vibrato, Enveloped Flanger, Enveloped Phaser,
Bass Enhancer, Pitch Shift or Pitch Bend, and Detune. Only one type of Effect from this group may be used at a
time. The Display will show the status of the Effect section as either
on
, or two dashes
--
indicating bypass.
The status can be changed by rotating the Data Wheel. If the Enveloped Effect is chosen, the Display will show an
abbreviation for the type of Envelope Effect. One or more of the Parameter LEDs will light with each selection in
the Effect group indicating Parameters which are associated with the selected Effect, and are available for further
adjustment. Use the Parameter button to access the associated Parameters. See pages 20 and 21 for a complete
description of these effect types.
6. Delay/Reverb - This button will access the Delay and Reverb effects. The selected effect type will be
indicated by a flashing LED. Successive presses of the Delay/Reverb button will toggle between the two effects. The
status of the selected effect and the current type of Delay and Reverb are shown in the Display. Rotating the Data
Wheel will change the status and/or the type of Delay and Reverb. Both the Delay and Reverb can be used
simultaneously. You will notice that one or more of the Parameter LEDs will light with each selection in this group.
The lit Parameters are associated with the selected effect, and are available for further adjustment. Use the
Parameter button to access the associated Parameters. See pages 21 and 22 for a complete description of Delay
and Phrase Sampler, and page 23 for Reverb effects.
7. Parameters - This button accesses the Parameters associated with the Compressor/Limiter, Bass Synth,
Effect group, Delay, and Reverb. The Parameter button will only work when one of these effect groups has been
selected for editing. The lit LEDs indicate which Parameters are associated with the selected effect, and the
currently selected parameter is indicated by a flashing LED. Successive presses of the Parameter button will
advance through all Parameters available for the selected effect. The Display shows the value of the selected
Parameter, and rotating the Data Wheel will change the value. See page 23 for a complete listing of parameters.
14