signal processing
To select Programs using the footswitches:
1) After you power up, the Acoustic One defaults to Program
mode. Select a Bank by pressing the Bank selector footswitch.
The display shows the selected bank number on the left side of
the display and a dash on the right. The display looks some-
thing like this:
or
2) Press footswitch 1, 2, or 3. The dash in the display changes to
show the number of the Program you selected. The display
looks something like this:
NOTE:
If a new Program number is not selected within 5 seconds
after pressing the Bank select button, the display returns to its pre-
vious setting.
Editing Programs
As you become more familiar with the Acoustic One, you may want to
modify certain Programs to better suit your needs. Fortunately, the
Acoustic One is flexible enough to give you everything you need with-
out being difficult to program.
The following procedure is an example of how to modify your
Programs. Suppose that Program 32 (which has a Tremolo effect),
sounds close to what you want, but you want a faster Tremolo speed.
Here's how to change it:
1) Use the Data wheel, or the Bank and Program selector
footswitches to select Program 32.
2) Press the Tremolo effect group button. The Tremolo group
Status LED begins flashing and the display reads:
3) Look at the front panel Tremolo groupings to locate the effect
you want. In this case, you'll see that Tremolo Fast, can be
found between 19 and 21 in the Tremolo Group.
4) Use the Data wheel to scroll until the the display reads:
19
DATA
16
DATA
23
3
2
1
2_
BANK
9
Acoustic One owner's manual
