DOD AC 260, Инструкция по эксплуатации

Страница: 7 / 10

amplifiers that reduce loading effects.
• Flat frequency response.
• Operates with battery or phantom power.
• Ground isolation switch.
• Internal pad for speaker level input.
• 4x12 emulator cabinet that gives a more enhanced
low end.
• Twin open-back combo that provides a brighter
sound with less low end.
Operation of the AC 285
• Connect the output of the high impedance source to
the input of the AC 285.
• Connect the low impedance output of the AC 285 to a
mixing console or other low impedance input.
Connect the unbalanced 1/4” tip-sleeve output to a
high impedance input (if desired).
• Set the ground lift switch to the position with the least
amount of hum or noise.
• Set pad switch to INSTRUMENT for line level input
sources or to SPEAKER for speaker level input
sources. Set power selector switch to ON for battery
power or to OFF for phantom power.
• Set speaker settings to FLAT if you want the direct-
to-microphone sound. If you are seeking the guitar-
to-board sound, the 4x12 or COMBO settings are
great.