79
Vo
ice
/V
id
eo
pho
ne
Cal
ls
/P
ush
Ta
lk
You can use the inside camera of the FOMA terminal as a monitoring
camera to observe the remote location from a phone that has the
videophone function based on 3G-324M. While “Remote monitoring” is
set to “ON”, the FOMA terminal automatically starts Remote Monitoring
when it receives a videophone call from a phone number stored as
“Other ID” of “Remote monitoring”.
(The FOMA terminal needs to be set to Normal Style.)
1
m
Set./Service
Videophone
Remote monitoring
Enter your Terminal Security Code.
To release Remote Monitoring, select “Set”, then select “OFF”.
2
Other ID
<Not recorded>
Enter a phone number.
To change, select the stored phone number.
You can store up to five phone numbers that can enter
up to 26 digits by using numerals, #,
:
, or +.
To return to the setting display for Remote Monitoring, press
r
from the Other
ID list after storing phone number.
3
Ring time
Enter a ring time (seconds).
You can enter the time from “003” through “120” in three digits until Remote
Monitoring starts after receiving a videophone call.
You cannot set the same ring time for Remote Monitoring, Auto Answer Setting
and Record Message Setting. Set a different time for each.
4
Set
ON
When receiving videophone calls from the phone numbers stored as “Other ID”,
the FOMA terminal automatically answers to start Remote Monitoring after the
ring time elapses.
“
” is displayed while this function is set to “ON”.
You cannot set to “ON” in Manner Mode.
<Remote Monitoring>
Checking inside of a Room when You are
Out
Other ID list
1
Make a videophone call from a stored phone number.
After the ring time set for “Remote monitoring” elapses, Remote Monitoring
automatically starts.
The image through the receiving end’s camera appears on the display and the
sound comes out of the speaker.
You cannot set Voice-only Remote Monitoring.
Make a videophone call notifying your caller ID. If the caller ID is not notified,
Remote Monitoring will not start and the call will be handled as an ordinary
incoming videophone call.
2
Remote Monitoring ends when the calling end or
receiving end presses
h
.
Press
d
or
O
o
(
) before the FOMA terminal answers a videophone call
automatically. If you press
m
(
), the videophone call starts sending the
substitute image to the other party.
When a remote monitoring call comes in, “Setting when opened” is disabled.
If you press
h
when a remote monitoring call comes in, the call will be cut and
Remote Monitoring will not start.
Function Menu of the Other ID List
Look-up address
You can call up a phone number in the Phonebook, Dialed Calls,
or Received Calls to enter it.
Select an item.
Phonebook
. . . Call up a Phonebook entry and select a phone number.
Dialed calls
. . . Highlight a phone number and press
O
o
(
).
Received calls
. . . Highlight a phone number and press
O
o
(
).
Delete this
YES
Delete all
YES
Information
<Delete this> <Delete all>
If you delete all phone numbers stored as “Other ID”, “Remote monitoring” is set to “OFF”.
Perform Remote Monitoring
For answering a videophone call without starting Remote
Monitoring at the receiving end
