185
Mai
l
1
l
Area mail settings
Do the following operations.
You can send or receive chat mail messages to and from multiple
persons on a single display. To use Chat Mail, you need to store chat
members. You can easily store them by creating chat groups.
<Area Mail Settings>
Setting Early Warning “Area Mail”
Receive setting
You can set whether to use Area Mail.
Read exemption clause thoroughly
ON or OFF
Receive entry
You can register Message IDs for the reports to be received other
than emergency information. You can register up to 20 IDs.
You do not need to operate “Receive entry” for receiving only
emergency earthquake alert and disaster/evacuation
information.
<New>
Enter your Terminal Security Code
Enter a registration name
Enter a Message ID.
To edit a registered Message ID, highlight it, press
l
(
), and then enter your Terminal Security Code.
You can enter up to 15 full-pitch/30 half-pitch characters for an
arbitrary registration name. For a Message ID, enter 4 half-pitch
characters specified by the service provider.
You can edit also by selecting “Edit” from the Function menu.
Select “Delete this” to delete the Message ID, and select
“Delete all” and enter your Terminal Security Code to delete all
Message IDs.
You cannot edit/delete “Emergency information”.
Beep time
You can set the duration the beep sounds.
Enter a beep time (seconds).
Enter it in two digit, from “01” through “30”.
<Chat Mail>
Using Chat Mail
You can store up to six chat members including the user (yourself).
1
l
Chat mail
i
(
)
Chat member
<Not recorded>
Enter a mail address.
To edit a stored member, select the member.
When the mail address is “phone
[email protected]”, store the phone number only.
You can enter up to 50 half-pitch characters.
Store Chat Members
Chat Member list
Information
If you edit the mail address of the stored member, the member’s name and image are
changed.
Function Menu of the Chat Member List
Edit
You can edit the mail address.
Go to step 1 of “Store Chat Members” on page 185.
Refer address
You can look up a phone number or mail address in the
Phonebook, Received Address, or Sent Address to enter it.
Select an item.
Phonebook
. . . . . . . . Call up a Phonebook entry and select
a phone number or mail address.
Sent address
. . . . . . . Select a phone number or mail
address and press
O
o
(
).
Received address
. . Select a phone number or mail
address and press
O
o
(
).
Change member
