Docomo N-01D Medias PP, Инструкция по эксплуатации

Страница: 115 / 207

113
Settings
Network security code
The network security code is a 4-digit
number necessary for using the docomo
Network Services or identification at
reception of your request in docomo Shop
or at docomo Information Center. It can be
set any number at the subscription and also
changed later by yourself.
You can change your network security code
to the new one from your PC if you have a
"docomo ID/Password" for General support
site for PC "My docomo".
⿟
For information about "My docomo", see the
inside of the back cover of this manual.
PIN1 code
The miniUIM has a settable security code,
PIN1 code. These codes are set to "0000"
(four zeroes) at the time of subscription, but
you may subsequently change it.
→ P. 111
PIN1 code is a 4- to 8-digit number (code)
that is entered to confirm the user when the
miniUIM is inserted in the FOMA terminal or
the terminal power is turned on. It is
intended to prevent unauthorized use by a
third party. Entering PIN1 code makes the
FOMA terminal operable.
⿟
If you want to use a miniUIM that has been
used on a different FOMA terminal, use the
same PIN1 code that had been set on the
different terminal. The code is "0000" if the
default setting has not been changed.
⿟
If you enter the incorrect PIN1 code 3 times in
succession, the PIN1 code is locked. Unlock
using "PIN unblocking key".
Enabling the miniUIM's PIN
Set to require entry of the PIN1 code when
power is turned on.
1
From the Home screen,
m
▶
"Settings"
▶
"Location &
security" ▶ "PIN setting"
2
"PIN1 code entry set"
■
To change the PIN1 code
▶
"Change SIM PIN"
▶
enter the current
PIN1 code
▶
"OK"
▶
enter the new PIN1
code
▶
"OK"
▶
enter the new PIN1 code
again
▶
"OK"
• "PIN1 code entry set" must be enabled
beforehand.
3
Enter the PIN1 code ▶ "OK"
PIN unblocking key (PUK)
The PIN unblocking key (PUK) is an 8-digit
number used to unblock the PIN1 code. You
cannot change the key yourself.
⿟
If you enter the incorrect PIN unblocking key
10 times in succession, the miniUIM is locked.
If this happens, please contact a docomo
Shop.