Docomo F-02B, Инструкция по эксплуатации, Страница: 20 / 150

18
In
trod
uction
Waterproofness/Dustproofness
F-02B is provided with the following waterproofness by firmly
closing the external connection jack cap, installing the back cover
and locking the cover.
・ IPX5 (Former JIS protection code 5)
*1
・
IPX8
*3
that is a higher standard than IPX7 (former JIS protection
code 7)
*2
Also, F-02B is dustproof to IP5X (former JIS protection code 5)
*4
if
the external connection jack cap is strictly closed as well as the back
cover is mounted and locked.
*1 Code IPX5 means that a phone keeps functioning after directly applying a jet
flow of 12.5 L/min. for at least 3 minutes from a distance of 2.5-3 m on a
rotating turntable.
*2 Code IPX7 means that a phone keeps functioning after it is slowly submerged
to depth of 1 m in static tap water at room temperature, left there for 30
minutes and then taken out.
*3 Code IPX8 means that it provides waterproofness of which exceeds of IPX7
standard.
*4 Code IP5X means that a device is protected against the ingress of dust specific
to dustproof test (25
μ
m or smaller in diameter), so that the ingress will not
interfere with predefined operation and safety of the device.
F-02B provides the following waterproof performances of IPX8.
･ F-02B keeps functioning after it is slowly submerged to depth of 1.5
m in static tap water at room temperature, left there for 30 minutes
and then taken out.
･ The mobile phone keeps shooting still images or moving pictures in
30 minutes in static tap water at room temperature.
✜
What you can do with waterproofness and
dustproofness of F-02B
・ You can talk or watch 1Seg programs without using an umbrella in
the rain (for rainfall of 20 mm or less per hour).
- When your hands or FOMA terminal are wet, avoid installing/
removing the back cover or opening/closing the external
connection jack cap.
・ You can also shoot still images and moving pictures in the pool
depth of 1.5 m.
- Do not perform other operations underwater than shooting still
images and moving pictures.
- If you put the terminal in water of swimming pool, be sure to have
it within 30 minutes.
- If FOMA terminal gets wet with water from the swimming pool,
wash it as predefined ( ⇒ P21).
・ You can use FOMA terminal in a bathroom.
- Do not put the terminal in the bathtub. Do not use the terminal in
hot water. Doing so may cause malfunction.
- Never put FOMA terminal in hot spring water or water containing
soap, detergent or bath powder.
To ensure waterproofness/dustproofness
To avoid water and dust ingress, be sure to observe the following
points.
・ Do not throw any liquid other than room-temperature tap water on
FOMA terminal, or soak it in such liquid.