37
Before Using the Handset
When the handset is turned on, you can charge
the handset by connecting the handset to a PC
with Micro USB Cable 01 (sold separately).
Install the USB driver to the PC in advance. If the
USB driver has not been installed on the PC, you
cannot charge the battery by connecting the
handset to the PC via Fast transfer mode.
Ʀ
For details on installing USB driver, refer to
“Manual for USB Driver Installation” in PDF
format in the following site.
(
http://k-tai.sharp.co.jp/support/d/sh-01e/ (in
Japanese only)
For details on connecting to a PC
n
P. 111
1
H
(for at least 2 seconds)
:
When you turn the power on for the first time,
the initial setting screen is displayed. Each
setting item can also be set from menus
(
n
P. 42).
:
If the initial setting screen for docomo service
is displayed, operate by following the
instructions on the screen.
1
H
(for at least 1 second)
/
[Power off]
/
[OK]
Do not forcibly insert or remove. May cause
damage to the external connector terminal, the
microUSB plug and the USB plug.
Pull the adapter out of the outlet or cigarette
lighter socket if it will not be used for a long
time.
Do not forcibly pull the external connector
terminal cover. May damage the cover.
Do not place objects near the handset when
charging. May damage the handset.
FOMA Charger microUSB Adapter SH01/
FOMA charging microUSB adapter T01 (sold
separately) is required to charge with FOMA
AC Adapter 01/02 or FOMA DC Adapter 01/02.
When using a DC adapter
The DC adapter should only be used in
negative grounded vehicles (12 and 24V DC).
Do not use with the car engine shut off. May
drain the car battery.
The DC adapter fuse is a consumable product.
For replacement, purchase a new fuse at a
local vehicle supply shop.
Refer to the user’s guide of FOMA DC Adapter
01/02 and DC Adapter 03 for details.
Charging with Micro USB Cable
01
Turning power ON/OFF
Turning power ON
Turning power OFF
