To Open -
Press the center of the top and the
outlet will pop up. Lift the outlet until it locks into place.
Wireless Charging -
Place the device gently
in the center of the top cover. Compatible with all QI
enabled devices. Ensure that there are no metallic
foreign objects on the charging pad. If you’re having
an issue charging a device, remove the device case, if
any, as it may block the wireless signal.
To Close -
Press the “Push to Release” button to
partially retract the outlet. Then press the top of the
outlet to push the rest of the tower into the benchtop
and to lock into place.
Install Docking Drawer in-drawer outlets into any
drawer to clear benchtop cord and device clutter and
bring purpose to your drawers. Docking Drawer Trio
outlets are Australian Certified for Safety and EMC.
How to Use the Outlet
Also Available from Docking Drawer
Scan code to
learn more
Docking Drawer Trio
Step 3 -
Rotate the adjustable ring in a counter-
clockwise direction to remove. Place the power cord
through the installation cutout and then insert the
base of the outlet into the cut out. Be careful to avoid
damage to power cord.
Step 4 -
Adjust the front of the product to face
the desired direction. Under the benchtop, rotate the
adjustable ring in a clockwise direction to tighten. Note
that when the adjustable ring is askew, it will get stuck.
If this occurs, re-tighten after alignment.
Step 5 -
Connect the power cord to a power source
within 1.5m, ensuring the outlet can open and close
without tension on the cord.
AG11021
[email protected]
www.dockingdrawer.com
+1 (925) 233-5598
