5030- Flush Pop Up Outlet
Installation Instructions
How to Install the Outlet
Step 1 -
Select a location for the pop-up outlet that
meets the following requirements:
•
The edge of the cut out should be at least 40mm
from the nearest wall.
•
A power outlet should be within 1.5 meters of the
installation cut out for the power cord to reach.
•
Benchtop thickness is between 10-45mm.
•
Consult the following illustrations to ensure there is
sufficient space underneath the benchtop.
Step 2 -
Cut a
95mm hole in
the surface of
the benchtop to
create the installation
cut out.
of space needed
under benchtop
benchtop
thickness
Cut out size
326
mm
10-45
mm
QUAD
5030-1333
5030-1133
TRIO
5030-1330
5030-1130
DUO
5030-1300
QUAD
5030-1333
5030-1133
TRIO
5030-1330
5030-1130
•
For indoor use only.
•
Avoid liquid spills into the outlet.
•
When using the wireless charger, do not place
metal objects, magnets, magnetic stripe cards, etc.
•
Be sure to ground connection.
•
Do not disassemble the unit.
•
If the product has malfunctioned, electrical
maintenance is required by a professional.
CAUTION – READ CAREFULLY
95
mm
Downloadable Resources
For additional planning resources, visit
• Spec Books
• Tear Sheets
• Electrical Certifications
• Cut Out Templates
DUO
5030-1300
of space needed
under benchtop
benchtop
thickness
277
mm
10-45
mm
of space needed
under benchtop
benchtop
thickness
227
mm
10-45
mm
Outlet #1
Release
Button
QI Wireless
Charging Top
Tower
1 USB-C (PD)
& 1 USB-A
Outlet #2
Outlet #3
Base
Ring
Adjustable
Ring
