DNT WT80, Руководство пользователя

Страница: 31 / 36

- 31 -
English
Channel scan
Busy channels can be automatically scanned.
To start the scan function proceed as follows:
Press the Menu button and UP button at the same time . The channel
scanning starts immediately.
Press the Menu button or PTT button again to stop scanning.
When the radio detects channel activity, it stops scanning and stays at
that channel. Scanning is continued if the there is no activity.
Press the UP button to scan the channels 1-8.
Press the DOWN button to scan the sub-channels.
When the radio detects channel activity, it stops scanning and stays at
that channel. If you press the PTT button you can talk on this channel
but if the talking stops for more than 4 seconds, the scanning starts
again.
Key lock
This function allows to lock the buttonpad, to avoid accidental unwanted
commands. To enable / disable the button lock function proceed as fol-
lows:
Press the Menu button for approx. 3 second until the key lock icon
appears/disappears on the display.
If the button lock function is activated, only the PTT and Call
button can be used. To disable the function proceed in the
same way.
Dual Watch
The dual watch allows listening to a second channel
Set main channel fi rst (example channel 2)
Press
Menu button 7 times, LCD display shows the DCM icon and the
channel number display fl ashes.
General operation
WT80.indd 31 WT80.indd 31 30.09.2009 13:40:06 30.09.2009 13:40:06