- 30 -
English
Monitor function
With the monitor function you can switch off the automatic squelch to
listen to the weakest signals, which are cut from the automatic squelch.
To activate the monitor press
Menu
button and the
Down
button at the
same time. A noise of weak signals is heard. To switch off the monitor
function press
Menu
button.
Channel selection
The WT80 offers 8 channels in the PMR band.
To change the channel proceed as follows:
Press the
Menu
button once, the
Cannel no.
fl ashes on the display.
Use the
Up-/Down
button to select the channel.
Press the
PTT
button to confi rm or wait 3 seconds, the changes are
be stored automatically.
CTCSS code
The WT80 has altogether 38 sub-channels which work in the CTCSS
standard. A private sub-audible tone may be programmed and associated
with every channel, to protect the radio from unwanted calls or interfer-
ence from other operators on the same channel. Squelch will open and
incoming messages will be received only from radios using the same
CTCSS tone on that channel.
To change the CTCSS code proceed as follows:
Press the
Menu
button twice , CTCSS code display fl ashes.
Press
Up-/Down
button to select your desired the CTCSS code (1~38,
"
0F
" is off)
Press the
PTT
button to confi rm.
General operation
WT80.indd 30
WT80.indd 30
30.09.2009 13:40:06
30.09.2009 13:40:06
