4
QW410
QW410
Connecting the Printer for the first time
ATTENTION:
Save the original box and packaging material! You can store
the printer in the box when it is not in use. You can also use
the box for transporting or shipping the printer.
1.
Unpack your printer.
Remove your new printer from the
shipping box. Remove any packaging material (plastic, tape, etc.)
from the printer.
2.
Verify that you have the following components.
•
(1) QW410 printer
•
(1) Paper tray
•
(2) Paper spools
•
(2) Paper spool spacers
•
(1) Printer power cord
NOTE:
You also need a box of QW410 printer media to use your new
printer!
3.
Place your printer in the printing location.
Set your printer on a
level, sturdy surface. Placing the printer on an unstable surface
could cause the printer to fall, cause you injury, or damage the
printer components during printing.
4.
Install the printer driver.
Go to the DNP website and
download the printer driver.
https://dnpphoto.eu/en/support-and-downloads/drivers-
tools/drivers
Follow the onscreen prompts as you install the driver.
