6
QW410
4.
Orient the paper roll.
Make sure
the paper roll is oriented so that
the leading edge of the paper roll is
coming over the top of the paper
roll and directed towards the
bottom of the paper roll.
5.
Set the new paper roll in the
printer.
Place the spool and new
paper roll in the printer paper
compartment. Remove the seal on
the paper. Advance the paper so
that the paper from the top to the
bottom of the roll and into the
printer paper compartment.
Continue feeding the paper until the
printer beeps. The ERROR LED
changes from flashing red and
orange to flashing red.
6.
Replace the scrap bin.
Reset the scrap bin in the printer.
NOTE:
The POWER LED light turns green when the ribbon, paper,
and scrap bin are properly installed. If the ERROR LED flashes
red, make sure ribbon, paper, and scrap bin are properly
seated.
7.
Replace the paper tray.
The paper tray can hold up to 20 prints.
However, it is recommended that prints are removed from the
tray at regular intervals to prevent jams.