8
2MCE-24P, Two Machine, Cuts Only Editor
4. OPERATION
a.
TRIM AN IN/OUT POINT
1)
Press
[
TRIM+
]
or
[
TRIM
–]
.
The display will prompt “Enter Time, Select IN/OUT
.”
2)
Enter the amount of trim using the numeric keypad.
The top row of the display will show the entered amount.
3)
Press
[
IN
]
to trim the IN Point.
Press
[
OUT
]
to trim the OUT Point.
The trimmed time will be displayed on the bottom row of the display.
b.
CLEAR AN OUT POINT
Press
[
CLR OUT
]
to clear the OUT point.
The OUT key indicator will turn off.
The OUT Point
on Recorder and Player
will be cleared to 00:00:00:00.
c.
GOTO IN/OUT POINTS
1) Press
[
GOTO
]. The GOTO key Indicator will turn on.
2)
The display will prompt for IN or OUT.
3) Press
[
IN
] to goto the IN Point.
Press [
OUT
] to goto the OUT Point.
OR
Press [
ESC
] to exit without searching.
d. CRASH
RECORD
NOTE
: Check the Record option in the Setup Menu. It should be set to Crash Record.
1)
Select the Recorder.
2) Press
[
SHIFT
] + [
RECORD
] if the option in the Setup Menu is set to Rec only.
Press [
RECORD
] + [
PLAY
] if the option in the Setup Menu is set to Rec +
Play.
The record VTR will begin recording immediately.
There is no preroll in the Crash Record mode.
The RECORD key indicator will turn on.
3) Press
[
STOP
] to end recording. RECORD indicator turns off.
