2044CL-O-EVS, 300 Clip Instant Access System, Odetics Protocol
13
12. LOOP
CLIP
ON THE ST400
a.
Load the clip using CLIP LIST, or recall a cue point.
(The clip MUST be loaded from the 2044CL.)
b.
Optional: Set an IN Point and/or OUT Point.
Jog/Shuttle to the desired IN point. Press [
IN
].
Jog/Shuttle to the desired OUT point. Press [
OUT
].
OR
Press [
SHIFT
] + [
IN
]. Manually enter the IN time on the numeric keypad. Press
[
ENTER
].
Press [
SHIFT
] +[
OUT
]. Manually enter the OUT time on the numeric keypad. Press
[
ENTER
].
c. Press
[
LOOP ENABLE
].
The clip will immediately start looping.
NOTES
: If the CLIP ID ends with an asterisk (“*”), it will automatically loop when either [
LOOP
ENABLE
] or [
PLAY
] is pressed.
Loop Clip will only work from the 2044CL. Loop Clip will not affect clips loaded from
the user Interface.
13. PLAY CLIP SEGMENT
a.
Set an IN Point and OUT Point.
Jog/Shuttle to the desired IN point. Press [
IN
].
Jog/Shuttle to the desired OUT point. Press [
OUT
].
OR
Press [
SHIFT
] + [
IN
]. Manually enter the IN time on the numeric keypad. Press
[
ENTER
].
Press [
SHIFT
] +[
OUT
]. Manually enter the OUT time on the numeric keypad. Press
[
ENTER
].
b. Press
[
RECUE
]. The clip will cue to the IN point.
c. Press
[
PLAY
].
The clip will play from its current time to the OUT point, then stop.
