Dnake E416, Руководство пользователя

Страница: 34 / 35

30
SAFETY INSTRUCTION
In order to protect you and others from harm or your device from damage, please
read the following information before using the device.

Do not install the device in the following places:

Do not install the device in high-temperature and moist environment or the area close to
magnetic field, such as the electric generator, transformer or magnet.

Do not place the device near the heating products such as electric heater or the fluid
container.

Do not place the device in the sun or near the heat source, which might cause
discoloration or deformation of the device.

Do not install the device in an unstable position to avoid the property losses or personal
injury caused by the falling of device.
Guard against electric shock, fire and explosion:

Do not use damaged power cord, plug or loose outlet.

Do not touch the power cord with wet hand or unplug the power cord by pulling.

Do not bend or damage the power cord.

Do not touch the device with wet hand.

Do not make the power supply slip or cause the impact.

Do not use the power supply without the manufacturer's approval.

Do not have the liquids such as water go into the device.
Clean Device Surface

Clean the device surfaces with soft cloth dipped in some water, and then rub the
surface with dry cloth.
Other Tips

In order to prevent damage to the paint layer or the case, please do not expose the
device to chemical products, such as the diluent, gasoline, alcohol, insect-resist agents,
opacifying agent and insecticide.

Do not knock on the device with hard objects.

Do not press the screen surface. Overexertion might cause flopover or damage to the
device.

Please be careful when standing up from the area under the device.

Do not disassemble, repair or modify the device at your own discretion.

The arbitrary modification is not covered under warranty. When any repair required,
please contact the customer service center.

If there is abnormal sound, smell or fume in the device, please unplug the power cord
immediately and contact the customer service center.

When the device isn’t used for a long time, the adaptor and memory card can be
removed and placed in dry environment.

When moving, please hand over the manual to new tenant for proper usage of the
device.