
7
Connecting the Power Cable
The following illustration demonstrates how to connect the Car Kit’s
power cables to the vehicle’s electrical system.
IMPORTANT!
Ensure the supplied fuse holders and fuses are installed in the following
configuration.
RED WIRE:
5 Amp Fuse
BLUE WIRE:
2 Amp Fuse
BLACK WIRE:
2 Amp Fuse
Warning!!
1.
The blue cable must be connected to the 12/24V switched IGN wiring
to enable the Car Kit to go into standby mode when turned OFF.
2.
Do not connect the blue cable to per12/24V. Doing so may
discharge the battery of the vehicle and prevent the Car Kit from
being reset.
3.
Please do not attempt to install the unit by yourself. Always consult
professional installer for power cable installation.
Installation