15
Resetting the Car Kit
If you are experiencing difficulty in connecting the phone with the car kit
or if you would like to delete all the previously paired phones you can
perform a master reset.
To master reset:
Press and hold the
ANSWER
and
VOLUME DOWN
button at the
same time. You will hear a tone (pairing mode), continue holding the
buttons until you hear the second tone.
Troubleshooting
For more trouble shooting information contact your place of purchase.
Resetting & Trouble Shooting
Issue
Solutions
My mobile
phone will not
connect to the
BHK9000
Ensure pairing procedure was followed correctly.
Ensure the Bluetooth function on your phone is
enabled.
Ensure the car ignition is ‘ON’. If ‘ON’ and no power
please check the fuses and wiring.
Master reset the car kit and make another attempt.
Turn your phone ‘OFF’ and ‘ON’ again then try again.
If your phone is very new check the support website
for an upgraded software version.
Call
disconnects
when
attempting to
adjust volume
With some phones, adjusting the volume before the
call is initiated will disconnect the call. Only adjust
the volume after answering the call.
My phone
cannot
recognise my
voice
Ensure windows are closed when using voice
recognition.
If your phone requires you to record a voice tag,
please record the voice tag using the car kit.
If your phone supports independent voice recognition
technology please speak clearly in normal speed.