background image

14

Wiring Diagram

On a towel or soft cloth, gently place the monitor assembly “face down” 
on a stable work surface. Using the wires provided, complete the audio, 
video and power connections in your vehicle as shown in the diagram 
below.

7

Monitor Installation

 
 
 
 

Attach the monitor mounting plate by 
screwing through the headliner and 
into the existing roof supports or the 
wood bracket you have made (see 
TIP bottom of page).

Cut hole in headliner for metal plate 
to 

fi

 t a 11/2 overlap is need for plate 

carefully secure plate to headliner 
or support beam (not roof).

Route cables using hardware 
supplied.

Align mounting holes secure unit to 
mounting plate tighten all screws 
evenly not to deform housing

INSTALLATION TIP

Make a MOUNTING BRACKET out of wood. This bracket mounts 
under the headliner, and provides a mounting surface to which the 
housing of the 

fl

 ip-down monitor can be attached.

        CAUTION: 

Make sure the screws are NOT long enough to go through the roof!

If you have any doubts about this type of installation, please consult 
your local mobile electronic retailer. Making holes in the roof of your 
vehicle will cause damage which is expensive to repair.

Содержание AFD102











Отзывы: