DNA ACD3, Руководство пользователя, Страница: 3 / 12

EN-
10
7
1
4
4
4
5
5
6
6
8
9
Dashboard
INSTALLATION
PRECAUTIONS
• Choose the mounting location carefully so that the unit will not interfere with the normal driving functions
of the driver.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight
or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration.
• Use only the supplied mounting hardware for a safe and secure installation.
• Be sure to remove the front panel before installing the unit.
NOTE: Inclination angle for car radio installation must not exceed 30˚ otherwise the front panel will not
open.
NOTE: Keep the release key in a safe place as you may need it in the future to remove the unit from the car.
TO SUPPORT THE UNIT
Detaching and attaching the front panel
The front panel of this unit can be detached in order to prevent the unit from being stolen.
FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL
Before detaching the front panel, be sure to press the button (1) to OFF first.
Then press the button (16), let the Front Panel arrive in horizontal position and detach the panel by
pulling it towards you as illustrated.
2
18mm
5mm
3
4
TAP
1
2
3
Bend these
claws, if necessary
release screw
and bracket
1. UNIT
. RELEASE CASE
. DASH BOARD
4. HEX NUT
5. LOCK WASHER
6. PLAIN WASHER
7. CAR BODY
8. REAR SUPPORT STRAP
9. TAPPING SCREW
10. M5 X 15 HEX BOLT
1
2
< 10°