DMX4ALL DMX-Servo-Control 2, Руководство пользователя

Страница: 9 / 15

DMX-Servo-Control 2
9
RDM
(from Hardware V2.1)
RDM is the short form for
R emote D evice M anagement.
As soon as the device is within the system, device-dependent settings occur remotely
via RDM command due to the uniquely assigned UID. A direct access to the device is
not necessary.
If the DMX start address is set via RDM, all address switches at the DMX-
Servo-Control 2 must be set to OFF ! A DMX start address set by the address
switches is always prior !
This device supports the following RDM commands:
Parameter ID Discovery
Command SET
Command GET
Command ANSI/
PID
DISC_UNIQUE_BRANCH

E1.20
DISC_MUTE

E1.20
DISC_UN_MUTE

E1.20
DEVICE_INFO

E1.20
SUPPORTED_PARAMETERS

E1.20
PARAMETER_DESCRIPTION

E1.20
SOFTWARE_VERSION_LABEL

E1.20
DMX_START_ADDRESS
 
E1.20
DEVICE_LABEL
 
E1.20
MANUFACTURER_LABEL

E1.20
DEVICE_MODEL_DESCRIPTION

E1.20
IDENTIFY_DEVICE
 
E1.20
FACTORY_DEFAULTS
 
E1.20
DMX_PERSONALITY
 
E1.20
DMX_PERSONALITY_DESCRIPTION

E1.20
DISPLAY_LEVEL
 
E1.20
DMX_FAIL_MODE
 
E1.37