DMX-RELAIS 8
20
Factory Reset
Before running the Factory Reset, read all steps carefully.
To reset the
DMX-RELAIS 8
into the delivery conditions use the RDM
parameter FACTORY_DEFAULTS or proceed as follows directly at the device:
-
Turn off the device (Disconnect power supply !)
-
Open housing, by carefully opening the side tab with a screw driver
-
Turn the address switches 1 up to 10 on ON
-
Turn on the device (Turn on power supply)
-
Now, the LED next to the address switch flashes within ca. 3 seconds for 20x
During the LED flashes set switch 10 on OFF
-
The Factory Reset is going to proceed
Now, the LED next to the address switch flashes with 4 short light
impulses
-
Turn off the device (Disconnect power supply!)
-
Set all switches on OFF
-
Close housing
-
Now, the device is ready for use
If a further Factory Reset is necessary, this process can be repeated
