E-11
WHEN ELECTROSTATIC DISCHARGE (ESD) OCCURS AT THE FRONT SURFACE
(WHETHER METAL OR PLASTIC) OR NEAR ANY PART OR ANY BUTTON OF THIS
UNIT, THERE MAY BE A POSSIBILITY THAT THE PRODUCT MAY STOP
OPERATION AND/ OR SHUT DOWN IMMEDIATELY.
THIS IS A NORMAL CONDITION AND INTENDED TO PROTECT THE UNIT AND INTERNAL
COMPONENTS AGAINST DAMAGE.
IN SUCH A CASE, PLEASE RESET THE UNIT BY THE SYSTEM RESET HOLE
(AT THE BOTTOM OF UNIT), SIMPLY INSERT A PAPER CLIP INTO THE RESET HOLE
FOR 2 SECONDS TO REVERT THE UNIT TO NORMAL OPERATION.
SYSTEM RESET
- PRESS TONE CONTROL KEY (ON REMOTE CONTROL), THE DISPLAY WILL SHOW
"TREBLE" ADJUST THE CONTROL LEVEL BY PRESSING NEXT/ TUNE + KEY OR
BACK/ TUNE - KEY AS DESIRED WHEN FINISHED MAKING THE ADJUSTMENT JUST
WAIT FOR 5 SECONDS THE UNIT WILL RETURN TO NORMAL MO DE.
- TO SET UP THE "BASS LEVEL, PRESS THE TONE CONTROL KEY TWICE, AND
THE DISPLAY WILL SHOW "BASS" ADJUST THE CONTROL LEVEL BY PRESSING
NEXT/ TUNE + KEY OR BACK/ TUNE - KEY AS DESIRED, WHEN FINISHED MAKING THE
ADJUSTMENT JUST WAIT FOR 5 SECONDS THE UNIT WILL RETURN TO NORMAL MODE.
- TO RESET THE TONE CONTROL LEVELS TO THE FACTORY DEFAULT SETTINGS,
SIMPLY PRESS AND HOLD THE TONE CONTROL KEY FOR 3 SECONDS, THE DISPLAY
WILL SHOW TREBLE = 0 AND BASS = 0 (FLAT MODE).
TONE CONTROL FUNCTION
TREBLE AND BASS CONTROL LEVELS:
SPECIFICATIONS
POWER SUPPLY : ............... 230V ~ 50Hz
POWER CONSUMPTION : .... 54W
SPEAKER : ........................... MAIN SPEAKER 2.5" x 2 + TWEETER 3.5" x 1
FREQUENCY : ..................... AM
522 - 1620 k Hz
FM
87.5 - 108 MHz
-6
-5
-4
-3
-2
-1
0
1
2
3
4
5
6
-7
-8
7
8
NIGHT FUNCTION
THE DISPLAY BACKLIGHT CAN BE SWITCHED ON AND OFF BY PRESSING AND
HOLDING THE "MUTE/ NIGHT" KEY FOR 3 SECONDS (ON REMOTE CONTROL).
CAUTION
BATTERY SHA LL NOT BE EXPOSED TO E XCESSIVE H EAT SUCH AS SUNSHINE, FIRE OR THE LIKE.
THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED
WITH LIQUIDS SHOULD BE PLACED ON THE APPARATUS.
THE MARKING AND RATING LABEL IS LOCATED AT BOTTOM ENCLOSURE OF THE APPARATUS.
THE MAINS PLUG IS USED AS THE DISCONNECT DEVICE AND IT SHALL REMAIN READILY OPERABLE.
TO BE COMPLETELY DISCONNECTED THE POW ER INPUT, THE MAINS PLUG OF THE APPARATUS
SHALL BE DISCONNECTED FROM THE MAINS COMPLETELY. THE MAINS PLUG SHOULD
NOT BE OBSTRUCTED OR SHOULD BE EASILY ACCESSED DURING INTENDED USE.
UNDER THE INFLUENCE OF ELECTROSTATIC PHENOMENON, THE PRODUCT MAY MALFUNCTION AND
USER TO POWER RESET.
EXCESS IVE SOUND PRE SSURE FROM EA RPHON ES AND HEADPHONES CAN CAUSE HEARING LOSS.
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR
EQUIVALENT TYPE.
1.
WALL INSTALLATION SET UP
2 x
2.
3.
X
E-12
6 x
0.
=14mm
X
X
=24mm
X
PDF created with pdfFactory trial version
www.pdffactory.com
