6
SETUP
SETUP
SETUP
SETUP
1.
Take out the tower body and tower base carefully from the box.
2.
Take out the 7 screws.
3.
Align the four holes on the body and base.
4.
Screw the base into the body by using a screw driver.
5.
Place the speaker so it’s standing on the floor.
POWER
POWER
POWER
POWER
Insert plug into AC 230V mains power and switch on the back of unit to the “ON” position to
Turn on mains power.
Remote
Remote
Remote
Remote
1.
Slide out the battery holder from the remote control case. (Push tab
“A” towards the middle first, see diagram).
2.
Place one 3V CR2025 battery into the battery holder, observing the
polar marking. If the battery is placed incorrectly, the remote
control will not work. Dispose of the old battery properly. Do not
leave it lying around where your child or pet could play with or
swallow it.
3.
Battery may explode or leak if it is mistreated. Do not attempt to
recharge it or disassemble it. Do not dispose of the old battery in a
fire.
4.
Insert the battery holder into the battery compartment.
Note:
Note:
Note:
Note:
Please remove all the batteries to prevent damage or injury from possible battery leakage if
the unit will not be used for a long period of time. Use only the specified size and type of battery.
Using the Remote control to operate the product
Aim the remote control directly at remote control sensor (IR) on the front panel. Don’t put any
objects between the remote control and the system while operating the unit.
