DMT Presenter Control Compact, Руководство по эксплуатации продукта

Страница: 16 / 23

14
Fig. 13
After successful sampling of the infrared code, a pop up window shall appear and ask you to confirm. If
the infrared cable is properly connected please check the projectors action. If ok, then confirm. If not ok,
press “No” and start all over again.
Possible causes for problems during infrared learning mode:
Check the connections of the learning cable.
Check if the if the infrared LED is correctly placed before the infrared receiving window of the
projector.
Incorrect sampling of infrared code and the projector’s action does not correspond with the
command.
Please let the host learn each function in sequence until full success.